How a Wog Ball Valve Works
Public Group active 2 years, 9 months ago1000 Wog ball valve assemblies are typically used in the sanitary, hydraulic, and industrial applications where conventional brass ball valves aren’t practical. They’re typically not used in hydraulic fluid applications because of surging, pressure, and temperature requirements (refer to N 10704 heavy duty heavy-duty plastic plumbing pipe valve assemblies). For these applications, special plastic plumbing pipe is utilized (refer to PPT pipes for more information on pipe seals). The advantage of using a ball valve assembly instead of a conventional valve assembly is that the grease seal between the wog ball and the plastic plumbing pipe prevents the passage of hydraulic fluid; thus preventing the occurrence of hydrostatic pressure buildup.
Ball valve construction involves the placement of the ball within a specially molded plastic housing. The housing is then screwed to the underside of the threaded polyethylene tube (or other type of threaded PVC pipe) which forms the valve assembly. The ball, a small solid object, is in motion within the tubing as it’s being forced up and down by the exerted pressure. When the valve is closed, the object will be trapped inside the plastic housing. If the valve is open, the object will be outside the plastic portion of the valve assembly.
There are a number of different types of balls used to regulate the flow of hydraulic fluid. The type of ball chosen will depend upon the application, but most commonly available are the hydroslide, silicone, oil, and the flexible plastic ball. Depending on the type of ball selected, the valve assembly may be either oil-sealed or oil-free (sealed ball usually have sealing hardware whereas oil free ball have an open valve design). Additionally, a wog ball valve consists of a flexible ring/rod (usually made of metal), ball-shaped sealing pads, sealing oil, and a bladder. In addition, this ball assembly may also contain an air release valve (to remove air from the ball when it is in a lower state of agitation) and an adjustable valve.
As the ball moves up and down through the tubing, pressure causes the ring/rod to compress or expand. This causes the valve to close or open depending on the direction of movement of the ball. In the event you loved this short article and you would love to receive more info relating to pvc hose coupling kindly visit our website. Wog ball applications range greatly in their size, ranging from a very small amount of fluid to a sizable quantity of industrial fluid. Typically, the larger wog ball valve designs are employed for fluid transport, such as for trucking/job site control, heavy machinery operations, or other large scale applications requiring controlled and reliable pumping of industrial/office equipment fluids.
An advantage to using a ball valve assembly is that it can be installed where other valves cannot be installed, such as in the oil storage tanks. Also, there is no need to drill into the walls of a building. Most ball valve assemblies can be installed by using standard threaded inserts, which are available in most hardware stores. One caution, however: A correctly installed ball valve assembly should be installed by professionals, especially if there are special valve profiles required for the application. These professionals can be found online or through a business that specializes in industrial maintenance and repair.
The fluid that passes through a wog ball can either be completely recycled or used to lubricate equipment. When the ball is in its closed state, it is referred to as a closed ball. When the ball is in its open (open ball) mode, it is referred to as an open ball. Typically, there are three different speeds for you ball operation, depending upon the fluid passing through the valve. The faster the speed of the ball, the faster the oil flow through the valve, and the more friction there is between the moving parts of the ball valve assembly.
How do you know if the ball has enough air pressure to prevent overheating and seals properly? The ball’s inner surface can be machined, but this can increase the cost of the ball valve assembly. If you notice that when you press on the ball that there is a clicking sound, this means that the seal is too weak or is improperly installed. If you don’t feel comfortable performing this function yourself, contact a professional ball valve company.
To increase the life of your dog ball, you need to keep it clean. It is recommended that you wipe out the wog ball after every use and keep it covered when not in use. It should also be cleaned periodically by spraying a gentle solvent cleaner into it to remove any buildup of dirt. You should also perform an annual maintenance run with your local garage or paintball shop. This helps to ensure that your valve components are working properly and that there are no leaks that are preventing the proper functioning of the ball valve assembly.
Sorry, there was no activity found. Please try a different filter.